temperature controlled cell holders

Water Thermostatted Cell Holders STR-707 Water thermostatted cell holder with stirrer A single position water jacketed cell holder with sample and reference position controlled and stirrered with magnetic stirrer Requires a thermostatted waterbath   HMC-711 Water thermostatted micro cell holder(100µL,200µL cells) Water thermostatted cell holder and reference for microcells Requires a thermostatted waterbath MHT-745 Manual 4-position  water thermostatted  turret cell holder Four position water thermostatted sample and reference Requires a thermostatted waterbath NCP-706 Water thermostatted 6-position automatic cell changer Water jacketed 6 position cell holder. Low cost temperature control for applications such as parallel kinetic measurements. Requires a thermostatted waterbath

Peltier Thermostatted Cell Holders PAC-743 and PAC743R Automatic 6/8-position Peltier Cell Changer (water-cooled)  With and without thermostatted reference Choose from a range of interchangeable cell blocks. 8-position micro cell block 8-position 5 mm cell block 6-position 10 mm cell block Eight samples at a time from a 96 microwell microtiter plate (8x12) can be directly transferred to the 8-position micro cell block with an 8-way micro pipette Temperature setting range :    -0 to 100 degC   Temperature control range :  0 to 100 degC (for room temperature = 20 degC) Temperature control accuracy : +/-0.3 degC EHC-716 Peltier thermostatted single cell holder(air-cooled)  The EHC-716 cell holder uses an air-cooled Peltier thermo-panel to precisely maintain the sample temperature. The thermo-panel performs heating and cooling. Temperature control using PID under PC control ensures stable temperature even when the set temperature is close to room temperature. The cell holder is equipped with a stirrer, enabling uniform cell temperature control. The EHC-716 cell holder is air cooled, and the ETC-717 cell holder is water cooled.   Temperature setting range :    5 to 70 degC   Temperature control range :  10 to 60 degC (for room temperature = 20 degC) Temperature control accuracy : +/-0.1degC ETC-717 Peltier thermostatted single cell holder(water-cooled)   Temperature setting range :    -10  to 110 degC   Temperature control range :  0 to 100 degC (for room temperature = 20 degC) Temperature control accuracy : +/-0.1degC PSC-718 Automatic 6-position Pelier cell changer(air-cooled) Temperature setting range :    10 to 70 degC   Temperature control range :  10 to 60 degC (for room temperature = 20 degC) Temperature control accuracy : +/-0.1degC PWC-758 Automatic 8-position Pelier cell changer(water-cooled)   Temperature setting range :    -10 to 110 degC   Temperature control range :  0 to 100 degC (for room temperature = 20 degC) Temperature control accuracy : +/-0.3 degC The peltier cell holders can be used with an external probe to measure the temperature in the measurement cuvette. OPS-512 Optional temperature sensor for ETC-716 and EHC-717   OPS-513 Optional temperature sensor for PSC-718   PAC-743 Automatic 6/8-position Peltier Cell Changer (water-cooled)